Hi, I bought 2 Whisperer sensors and when I try to connect to the Netro Wifi, it doesn't show up in my Wifi networks.  The other one showed up no problem.  Is there a factory reset option?

Hi,
I think I am cursed. I had to run a new line for two of my sprinkler valves as I had to move them and it was easier just to run new wire. The sit together in the same hand hole. I am having problems with one of the valves as it goes on when any of the other zones is active. I have replaced the valve once, the selenoid twice (showing solid OHM rating both times. I have the senenoid screwed down nearly all the way. It is the same zone (8) every time. I took a common wire and two others from the new line one went to each valve and the other to the far left common post. The valves, of course, are wired with one from the zone, and the other to the common wire that goes back to the far left C.  When the zone is off it is showing it is throwing about 2 volts AC. I suspect that is normal, or is it a sign of something else? 

I have a Spark 16 and it has been in operation less than a month. 
Thanks,
Kirk

https://identify.plantnet.org/en/namerica/species/Phlomis%20fruticosa%20L./data

I have this plant but cannot find it in the plant library. 

Thanks. 

I have problem connecting netro whisperer gen 2.

I already try with 2.4 wifi but at the end failed.

Any suggestion?

Any issue with iphone 14?

When I click on manual run for my sprinkler system, no blue arrow is there to start on the zone it how do I program them back on so I can do that

Hi, my sprinkler was working till yesterday but today non of the zone is working . Mine shows online and when I run it manually, it shows as running but it is not watering.is that related to Netro server issue ?

Hi,

I've two whisperer and four zones linked to them. I've customized the smart watering setting the correct flow rate of my Sprinklers. I've to set the humidity range for: Tall Fescue, Kentucky Bluegrass,Perennial Ryegrass and three trees: Sweet Cherry, Common Ash, Catalpa.

I want to economize my watering what humidity range I've to set?

Thanks

Hi

Netro light is off everything is connected but it is always off line. I have already changed cr1220 battery inside but light is off not i also have changed the trasnformer no working at all very sad

Hello,

I'm trying to add a whisperer to my system. 

When I go through the procedure, in the app i get asked the address then I press enter and I receive an error message saying that I must switch on the GPS services, which is already on and I cannot go past this. Anyone can help please?

Thanks! 

Dear support,

I’ve just bought and installed the sensor and I’m unsure (and other articles haven’t cleared this) which would be the right setting for the watering adjustment. I’ve set 80% to Skip and 20% to Add. This is for a grass lawn. Is this right?

Thank you

Hi. 

I made a mistake on my netro spark and included a rain delay from the main screen.

How can I delete this delay?

Thank you

Salve, vorrei capire come far accedere il client al programmatore, ho provato ad aggiungere l'indirizzo email, ma sembra che l'applicazione non dia accesso slave all'utente.

I just developed a Netro Smart Garden integration for Home Assistant.

Take a look here if interested: https://github.com/kcofoni/ha-netro-watering.

Best regards

I have noticed at times when I’m using the app that it states that it is watering when it is not. I checked the schedule, and the schedule does not say it is watering either. Any suggestions as to why this is happening? Thanks.

I just got the new pixie z1 and it doesn’t control the water from the faucet. When I turn it on the water simply flows through as if the smart faucet isn’t there. Also I did not receive my smart sensor for the ground and no responses from the emails I have sent you you. 

Jason Willis

Jason@wishsystems.biz

Hello

Quite often I have my Netro controller disabled and then enable it quickly to be able to do some manual watering.

What would be useful is that, after the manual cycles, the unit would return to disabled mode (i.e. preserve the state of the unit as it was before the manual watering). This would stop the automatic watering from starting unintentionally.

Good morning,

I already have the Sprite 12 and want to add one or two Pixies. 

Do I need the hub for the pixie or the sprite12 acts as hub?

Thank you!

Sergio

I bought a Netro controller, installed it, and everything works. When I try to integrate it with Alexa, it becomes complicated. I already downloaded the skill and associated my user, but it doesn't appear in Alexa. It only works when testing the skill. Does anyone know how to solve this issue? Thank you.

I have purchased Netro Sprite from Amazon. I'm now trying to purchase a couple of Whisperer units. Is there anywhere in the UK as purchasing from the online shop the delivery charge is over $26.

Thanks

Phil

How do I cancel a schedule watering on the Netro App? I set up a schedule for heavy watering but only wanted to run it 2 days, now I can’t figure out how to cancel the schedule!