更多篩選條件

Server upgrade scheduled on May 16th between 8:30PM and 9:00PM (Pacific Time)

Netro Inc
更新時間 2020-05-17 03:23:28 UTC 
話題: 通用

To all Netro customers:


Due to rapid increase of active devices connected to the Netro cloud server, we are going to upgrade our server on May 16th Saturday night from 8:30PM to 9:00PM (Pacific Time). During that time frame, all cloud service will be temporarily unavailable but your watering schedules will run normally. If you have a smart watering controller, the light on the unit will blink fast.


Thanks,

Netro Inc


瀏覽: 10617   評論: 0

Tips for Watering New Garden Plants

Netro Support
更新時間 2018-06-04 12:37:29 UTC 

How you water your new plants can make all the difference. Deeper, less frequent watering will grow plants whose roots are deeper and healthier, so they are more resilient to drier conditions and stress. Water a plant immediately when you plant it. If watered properly the first growing season, your plants should be well established the following growing season. Their roots should be deep and tough enough to seek out water on their own. You will only have to water these established plants on hot, dry days or if they are showing signs of distress.

The following are general guidelines. How often and how long you water will depend on your soil and other factors.

1.Year One

When planting water plants as soon as you get them in the ground. Allow the water to soak in and drain, and water again, until the soil is thoroughly moistened.

2.For the first week or so after planting

Water just-planted plants frequently - daily or every other day - as the roots will not be able to access soil moisture from a very large area until they begin to grow.

3.After the first week or so

Unless the weather is extremely hot and dry, you may be able to decrease watering frequency, perhaps to two or three times per week, for the next month or so.

4.Years Two to Three

You should need to water deeply only once or twice per week in dry weather if you have selected the right plant for the right place, prepared the soil and planted correctly, and mulched your plants. Exactly how often and how long you water will depend on your soil and other conditions.

5.After Year Three

Properly planted and watered, plants should be fairly well established by now, and can thrive with less watering than you may expect.


Helpful Tips

• Know your soil type, as this greatly affects watering frequency and duration.

• Allow the top inch or two of soil to dry between waterings to encourage deep roots.

• Group plants with similar water needs together.

• Consider using soaker hoses, as you can get water where you need it and lose less to evaporation.

• Young trees will need deep regular watering during their growing periods. During periods of little or no rain, water deeply once a week until they become established. Water established trees during heat waves and drought conditions.

• Spot-water plants with different needs than the rest of the planting bed.

• Remember that shallow-rooted plants such as rhododendrons, azaleas, heathers and bedding plants may continue to need more frequent watering than most other plants.

• Mulch for moisture. Mulch reduces water loss and adds humus to your soil to retain more moisture.

• Check for soil moisture before

Before you water:

Generally, you want the soil to be dry an inch or two below the surface before you water, so probe with a spade or trowel to check.

At least one hour after you water (or longer with clay soil):

Probe into the soil again to see how deeply the water penetrated. Did it penetrate all the way to the root zone? If not, you may need to increase your watering time. But if the area looks well-saturated, you may want to cut back the next time.

瀏覽: 14537   評論: 4

Fertilization program

Andrea Merito
更新時間 2020-04-27 14:30:47 UTC 
話題: Netro App

Good morning,

I ask you for a suggestion in your app.  in the program menu, in addition to displaying the manual and automatic programming, can you enter a command regarding fertilization?  I use fertilizers from the Bottos company, where each product has its weight and timing.  Maybe create a partnership with the big fertilizer companies.


Best.


Andrea

瀏覽: 8874   評論: 1

Netro now supports Spanish, Italian, French and German for Amazon Alexa

Netro Inc
更新時間 2020-03-16 02:40:52 UTC 

Great news! We now support Spanish, Italian, French and German for Amazon Alexa voice control. Please find the new skill "NetroHome" in your Alexa app and link your Netro account.


In case you experience difficulties in using the NetroHome skill, please write to support@netrohome.com or contact us in the Netro app.


Thanks,

Netro Inc

瀏覽: 30301   評論: 7

Netro now supports Spanish, Italian, French and German for Google Assistant

Netro Inc
更新時間 2020-02-28 07:49:20 UTC 


Great news again! We now support Spanish, Italian, French and German for Google Assistant voice control. Please say "Talk to Netro Home" in your Google Assistant app on your phone and link your Netro account before using your google devices.  


In case you experience difficulties in using the Netro Home skill, please write to support@netrohome.com or contact us in the Netro app.  


Thanks,  

Netro Inc


瀏覽: 9960   評論: 3

How to replace an old controller with more than 12 zones

Netro Inc
更新時間 2019-11-06 09:20:19 UTC 
話題: 安裝

If your old controller has more than 12 zones, you will need to have 2 Netro controllers to replace it. Please follow the diagram below to safely wire the 2 controllers:



Now you can use the 2 C slots for the common wires and the 2 sets of 1-12 slots for the zone wires. If you do not have a master valve or pump, just ignore the orange wires.


IMPORTANT: the blue wire has to be connected to the left 24VAC on both controllers and the yellow wire has to be connected to the right 24VAC on both controllers.


Please contact us if you need the wire connectors shown in the picture.


Netro Inc

瀏覽: 10201   評論: 0

Netro has updated max day regulation

Netro Support
更新時間 2019-12-25 01:46:02 UTC 

To the Netro Community,


Recently Netro has enabled the max day Restriction in Settings->Regulation for those cities which limit watering to one or two days per week. We are aware that many cities are under mandatory regulation and the penalty for violating the water regulations is large, therefore, we have enabled the max day regulation.

Users can go to Settings->Regulations to check and please feel free to report us if the regulation is incorrect.

For some local regulations, we are not quite sure if it is conservation plan or mandatory regulation. If the regulation is not needed, please write to us support@netrohome.com and we will check and update our regulation database accordingly.


Thanks,
Netro Support



瀏覽: 12755   評論: 0

Plant Sensors Monitoring Multiple Zones

Netro Support
更新時間 2019-08-07 06:39:15 UTC 
話題: Netro App

To the Netro community:


We recently have launched an update for the Netro app on App Store and Google Play. In the newest version of the app, we allow one sensor to monitor up to 3 zones but the user needs to make sure the zones have similar environmental conditions.


Please upgrade your app to the newest version and go to Settings->Sensors, select a sensor, go to Zones and select the zones you would like to monitor.

            

            

After saving the changes, you can go to the Home page and check the topsoil moisture level of your zones reported by sensor.


Please feel free to explore other new and exciting features that we just added : 

1.Support Apple Watch

(only available for iOS )


2.Support Weather Underground PWS

(Settings->Controller->Weather Provider)


3.Rainfall adjustment

(Please go to the Discover page and tap the "+" button on the upper right corner,  select "Correct Rainfall")


Regards,

Netro Support




瀏覽: 11017   評論: 3

Netro on Apple Watch

Netro Support
更新時間 2019-08-07 06:39:26 UTC 

To the Netro community:


We recently have launched an update for the Netro app on App Store. In the newest iOS version (2.3.0) of the app, Apple Watch is now supported.

In the watch app, users will be able to check the status of the device, the weather data, zone status and view watering schedules in the next 7 days.



Please feel free to explore other new and exciting features that we just added (also available on Android) : 

1.Support Weather Underground PWS

(Settings->Controller->Weather Provider)


2.Rainfall adjustment

(Please go to the Discover page and tap the "+" button on the upper right corner,  select "Correct Rainfall")


3.Enable plant sensors to monitor multiple zones

( Settings->Sensors, select a sensor, go to Zones and select the zones you would like to monitor)

Regards,

Netro Support




瀏覽: 53571   評論: 15