Más filtros

trouble connecting sprite to wifi

Gary Walloch
Actualizado 2021-08-22 13:48:00 
I reset my netro sprite as work was being done on my sprinkler system.  It came back on slow blink.  I have not been able to reconnect to my internet.  when setting up netro shows up on my phone with good wifi connection, but will not connect. I have turned data off and still not luck. I have unplugged Netro sprite and still no luck. If anyone has any ideas please share.
Ver: 4081   Respuesta: 1

javier58
Actualizado 2021-08-21 02:52:17 
What is the moisture range for St. Augustine grass ?
Ver: 3465   Respuesta: 1

Insertar programss

Gaspar Morey
Actualizado 2021-08-20 20:01:36 

Tengo diseñados una serie de programas de riego.. ¿Como puedo insertarlos en el día en que quiero regar? P. ej. : día 21 de agosto quiero aplicar el programa "5"


Ver: 3446   Respuesta: 1

Adaptador

Roberto Baltar
Actualizado 2021-08-16 05:47:49 
Hola. 

Quería saber si este adaptador es válido 

Ver: 3659   Respuesta: 2

Skip zone

the2brads
Actualizado 2021-08-11 22:21:07 
We have 11 zones...I want to skip 1-3 and 7-8 an have them water every other day. I can't seem to figure it out! Unless I do it manually?
Ver: 3649   Respuesta: 1

Google Home

Michael Wheatley
Actualizado 2021-08-11 15:45:28 

I have two controllers: a Sprite with 6 zones and a Pixie faucet controller.  I would like to use Google to start and stop watering on the Pixie faucet controller.  The User Guide FAQ says:


"3. What if I have multiple controllers?

Unfortunately, Google Assistant doesn't support multiple devices. The NetroHome action controls your first Netro controller. If you have multiple Netro irrigation controllers, please try with Google Home."


How do I control the PIxie in the Google Home app?

Ver: 3833   Respuesta: 1

What happens to the last schedule if device is offline?

Francesco G
Actualizado 2021-08-08 17:24:19 
Will stop or keep looping the schedule?
Ver: 3613   Respuesta: 1

Home screen shows next Watering for each zone in non stacked hours

Brian Brun
Actualizado 2021-08-03 02:40:17 

I am confused. I have a program setup for zone 1-5 to start water starting at 9:00am on Tuesdays. I looked at the Home Screen today and it shows the next Watering for each zone to be like: Zone 1=8 Hours, Zone 2=11 Hours, Zone 3=11 Hours, Zone 4=7 Hours, Zone 5=8 Hours. 


It’s 10:30pm on Monday night now. Why are the times shown different? I want Zone 1 to start at 9:00, Zone 2 to start when Zone 1 finishes, Zone 3 when Zone 2 finishes... why are these times all over the map?

Ver: 3947   Respuesta: 1

Just setup metro pixie.

mprtjd
Actualizado 2021-08-01 18:26:34 
For some reason the pixie is stuck in the on position. I cant turn off the water 
Ver: 3823   Respuesta: 2

Data out of the API

Jens Wymeersch
Actualizado 2021-08-01 13:24:46 

Dear Netro,


Although you have provided a lot of data via the api. And for all of you who wanted to get data out to your smart hub, it's there for the grabs ! 

ONE DOWNSIDE, i would have expected the battery data of the plant sensor to be provided for the start and potentially the state of the sensor. Although that you could potentially use the last update, to deduct this. When can we expect this to get updated ? 

Ver: 4082   Respuesta: 2

Problemas con la conexión Wifi

Paco Gómez
Actualizado 2021-08-01 05:26:03 

Buenos días hace una semana que instalé Netro 12  estaciones

He perdido la señal wifi en tres ocasiones. He observado que para que vuelva a estar en línea debo desconectar de la corriente eléctrica y volver a conectar el programador,. Me gustaría saber si esta es la manera normal de proceder.

Por otro lado también he observado que si esta fuera de Línea, no riega el jardín lo  que  supone  un problema, pues el programador no lo tengo en mi vivienda habitual.

De que manera puedo resolver estos dos problemas.

Un saludo

Ver: 3495   Respuesta: 1

Netro and Home Assistant

Jens Wymeersch
Actualizado 2021-07-28 18:18:16 

Although that I'm still hoping Netro will start understanding their appliance/app is only a smart part of a smart home ecosystem and start integrating with Home Assistant. Even huge vendors like Tuya, have understood that this is essential for most Home Automation Enthusiast. 

For the time being, some folks have used the API to get some data to home assistant https://community.home-assistant.io/t/netro-integration/51012/13


I believe a lot of us are happy with the appliance, but aren't looking at it often enough. Result in my case at least that my whisperer was out for more than a month. This could have been avoided if we had an integration to Home Assistant who would have alerted me.

So please Netro, do the extra mile !

Ver: 8602   Comentario: 7

How to stop watering all zones after rain?

David Farries
Actualizado 2021-07-28 02:11:18 
We had 1/2” of rain this afternoon and the scheduled watering came on tonight. Is there an easy way to stop watering all zones for that day?
Ver: 4166   Respuesta: 1

Strange Whisperer Acrtivity

ducati1198804
Actualizado 2021-07-24 17:00:16 

Hi,


I have a whisperer that monitors zones 1, 2, and 3.  Zone 1 is the primary zone.  Because whisperer detected a moisture level that was too low it did an additional watering of 10 minutes.  The strange thing about it is that it only watered zone 1 for the additional 10 minutes.  Why didn't it water zone 2 and 3 when they have the exact same conditions and moisture levels.  I had to go in and do a manual run to even out zones 2 and 3 with zone 1.  


Also in the beta software when you try to switch from basic to advance watering or choose a different watering algorithm you get an error message.  

Ver: 4839   Respuesta: 5

Connect to a network

James Yates
Actualizado 2021-07-22 21:08:14 
For some reason my controller goes offline every once in a while. It messed things up because it shows all of my zones are underwatered when I’m reality they have been watered. Is there a way to switch it from one with network to a different one that is closer. I can’t seem to find how to update the wireless network for the controller
Ver: 3554   Respuesta: 1

Netro Pixie with Google Home

fauxserious
Actualizado 2021-07-21 19:50:41 

Hi, I've been trying to integrate Netro with Google Home. The Pixie is connected in my Netro app. After logging into through Netro through my Google Home app. The following message appears:

No devices were found in your Netro account.

What is the issue?

Ver: 4081   Respuesta: 1

Do I need wifi for it to continue to water on schedule?

BaiPhillips
Actualizado 2021-07-20 20:42:15 

Hi, I’m moving and leaving our Netro system at our old house. I just need to know if it will continue to water when I cancel the internet service for that house?

I just find it alittle ridiculous to pay an internet bill for only the sprinkler system to run.

Ver: 3938   Respuesta: 2

Connecting problem with android

Jcraft200
Actualizado 2021-07-18 02:44:57 

Having trouble connecting when adding product.

I get to set 3 set up wifi

I connect to netro unit. I cannot switch back to netro app. When I restart app, it wants me to connect to home WiFi..

....

Never ending cycle. Thoughts??

TIA

Ver: 4057   Respuesta: 4

New system won’t work

acala768
Actualizado 2021-07-16 13:30:59 
I am trying to manually torn on the sprinklers and it no longer works. I have used it once, right after I bought it and it has rained for two weeks and didn’t have to use it but now I do. 
What do I do. 
Ver: 3663   Respuesta: 1

Anyone actually Beta Testing

ducati1198804
Actualizado 2021-06-29 14:10:59 
I signed up to be a beta tester but have never received any information or a beta version of the app to test out. Anyone actually beta testing anything?  Maybe I just wasn’t chosen to participate.   
Ver: 4294   Respuesta: 2