More filters

Umidità terreno

Alessandro Zannini
Updated at 2025-07-03 19:20:15 UTC 
Perché nonostante l umidità rilevata dal sensore sia superiore alla soglia impostata, la centralina programma delle irrigazioni?
View: 345   Answer: 1

Programm issue with App ( manual mode )

Pierluigi Erba
Updated at 2025-06-25 14:39:59 UTC 

Il programma notturno funziona regolarmente ma non funziona lo start manuale.

Anche entrando nel programma e selezionando esegui ora non parte.

Ho già provato a riavviare App centralina NETRO e router Wifi senza risultato.

Rimane in connessione ma non parte !!

My account Pier1972

View: 249   Answer: 0

Whisper set for additional water at 60%-not watering

Kirk Davis
Updated at 2025-06-25 16:41:56 UTC 

I have three zones with Whisperer 2 devices that have been installed for some time. It to skip watering above 90% and water extra at 60%. Soil moisture is currently at 56% and to says it isn't going to wTer again for like 40 hours. What's up with that? There is only a 38% chance of rain, and that is .1 inches so that can't be it.

View: 279   Answer: 1

Netro Sprite

Cassio
Updated at 2025-06-26 08:43:13 UTC 

Good morning,


I have my netro sprite with green light showing connected.

Nonetheless, when executing the programs it shows "connection problems". When I try to run the programs manually, it keeps "connecting..." but does not open the valves so that it waters.


I have removed and reset the connection with the network, it becomes green again, but it still not work.

I have also reviewed the electrical connections on the valves, and they are ok.

I have also tested opening the valves manually, they open and water normally.


the only problem is when executing electronically... it keeps "connecting...." and does nothing.


Thanks for your support!

View: 290   Answer: 2

What does the yellow triangle mean?

Jack De Donato
Updated at 2025-06-26 11:48:52 UTC 
Question in subject title
View: 245   Answer: 0

Font size/ dark mode

Kirk Davis
Updated at 2025-06-28 04:53:19 UTC 
Dark mode and font size (especially a problem with charts) are two things that were going to be addressed a few years ago. Could I please get a current status on when dark mode will be available and when font size, or at least the ability to zoom the app screen will be available? Turning on the Apple magnifier, or having to take a screenshot and then zoom that so that you can read data is very inconvenient. 
View: 267   Answer: 1

Multiple controllers — 1 app?

Jordan B
Updated at 2025-06-28 07:48:22 UTC 
We have 3 controllers for over 24 zones. 

The challenge we’re having is that smart watering isn’t aware of what each controller is doing, so each controller winds up scheduling zones which all run at the same time. 

This is a problem due to the zones being starved for water pressure. 

Is there any way for the app to se all 3 of our controllers as 1 unified home/water supply?
View: 238   Answer: 1

Valve compatible with Netro

Francesco Manella
Updated at 2025-06-29 10:55:38 UTC 

Hi everyone,

I tried to conect 24v and 9v  valve to ny Netro 6 zone system. It seems dont work... I heard a noise near evry valve when turnd on (on manual mode) but water doesn't com up... Just a 9v valve can open just for few second... Water comes up... But after this tine... Water stop to come.



In the pictures show a 2 model used (24 and 9v)

Thanks to every can help me


View: 274   Answer: 0

Unified controllers

Gianluca Spada
Updated at 2025-06-29 20:59:51 UTC 
It would be great if for someone like me there would be an option that unifies multiple controllers into just one home so that scheduling would be much easier and avoids multiple zones of different controllers run at the same time. When programming controllers in fact, I have to keep switching programming in various controllers to see if that time is not taken by another zone of another controller. Otherwise water pressure would be a problem if two or more zone are running at the same time in different controllers. 

I hope the message is clear and I hope it will be implemented in a future release as I don’t think it would be that difficult to create. 

Thank you!
View: 235   Answer: 1

Valve not opening

paolo cellini
Updated at 2025-07-01 05:11:54 UTC 

I have a Netto controller 12 

It starts the water pump but not opening any valve 

View: 228   Answer: 1

How to increase length of watering time with the automatic metering

Veronica Slaughter
Updated at 2025-07-03 12:43:45 UTC 
I have 2 zone in full sun with hydrangea and Japanese maples. I need to increase the length of watering time on the automatic watering cycle and the frequency
View: 184   Answer: 0

Whisperer 1 Dead

Andy Fiore
Updated at 2025-07-03 15:13:13 UTC 

Hi,

My Whisperer 1 doesn’t show any signs of life after two weeks in bright sunlight.

I’m pretty sure the battery or charging circuit is dead after no use for over a year.

Do you offer a repair service or replacement battery?

Regards,

Andy Fiore

View: 198   Answer: 0

1 out of 9 zones only work manually

Gyade B.
Updated at 2025-07-03 23:32:35 UTC 

Hello,

Zone 4 out of my nine zones will only run when I manually  turn the  controller valve  in the box in the ground, and not from my metro sprite app. I tried removing and inserting the zone 4 wire in the Netro slot , but still no luck . All the other zones will run from the app except zone 4. Please help.

View: 237   Answer: 1

New app (Android)

Ken Jennings
Updated at 2018-06-08 16:39:10 UTC 

Not really a question but a shout-out about the changes to the app.  l found the wonderful new additions that the Netro team just made.  I suggest everyone check out the new additions.  I have tweked a couple of my zones and Very pleased.  Suggest everyone check it out!


View: 6756   Answer: 1

Great job Team!

robertj51
Updated at 2018-06-11 17:43:40 UTC 
Topic: General
This is a great product with a great application as well. Thanks to the team and the developers for working hard to make this right. This is fantastic!
View: 5954   Answer: 1

Weather override

U Koul
Updated at 2018-06-15 17:39:02 UTC 
Smart watering disables my program as it thinks its going to rain, how do I override it - if the weather forecast doesnt pan out or we dont get enuf rain
View: 6056   Answer: 3

Subsoil Moisture-Netro app

Rick Priory
Updated at 2018-06-16 13:09:48 UTC 
How is the subsoil moisture determined on the Netro App for each zone?
View: 5600   Answer: 1

Soil type?

John Broadbent
Updated at 2018-06-16 14:27:36 UTC 
The app has a number of soil choices- I don’t know which to choose. I assume different soil has different water retention. Is there a list which shows how much water the different soil types require?  Or is there a way to tell which soil you have?
View: 6388   Answer: 2

Two locations

Robert Garlick
Updated at 2018-06-22 13:31:35 UTC 

I have a system working in Florida and I just wanted to do the same thing in Kansas and I bought it and I have wired it but I haven't plugged it in because I don't know how I'm going to control each different location and I'm afraid something might go wrong and I won't be able to water in Florida.

So how do I control each separate location with the same phone?

View: 5689   Answer: 1

Scheduling

Richard Hall
Updated at 2018-07-09 15:56:46 UTC 

i’ve had the controller installed for almost 2months now and it works fine. I like the idea that it seems to know how much to water and keep the lawn  green. However I have pets who use the backyard and would like the watering to be between 9 pm and 5 am.  I think the system can be setup for manual watering times BUT that defeats getting an expensive smart system to replace a low end rainbird system.  

Is there anyway to set up time constraints on the system and still run on automatic,


Also lack of a manual and good instruction is a pain. 

View: 5498   Answer: 1